110-130VAC Convert to 12VAC Transformer

TMI 60W 12VAC  Model: TM-60-12WB-1C transformer for low voltage LED lighting use.  

 
Our productis engineered to meet the highest standards of functionality 
and  design and its simple structure enables user to easily operate. 
It offers a functional intelligent photo timer sensor on 8-foot
lead wire that is easly placed through a small hole in a wall or ceiling.
 
1.   Input power cord plugged in power "120VAC 60Hz", 
      Attach output power cable to bottom to transformer 
      output terminal. 
2.   Rotay light control.
      The bulb will light automatically when the surrounding
      luminance turns dark.
3.   After sense the surrounding luminance, PTS will 
      response automatically after 30 seconds to avoid    
      any error response due to ambiguous light. 
  
4.   Timer Control.
      When light are ON, the timer will start to count time. 
      Timer can be set up from Automatic, 4,6,8 hrs.
      When the inner timer run out the setting hours, 
      the lights will turn OFF automatically. During the
      timer working, if PTS sense the intensive 
      luminance over 30 seconds, the lights will turn 
     off automatically. Trun knob ”ON” directly to turn ON 
     and “OFF” to turn off the light. (See fig3)
5.   Restore automatically in 24 Hrs.
      The second day after the setting has completed, 
      when PTS sense the luminance get dark, it will 
      repeat the function same as previous setting.
6.   Short-circuit protection.   
      Check Over Current fuse if the lights do not light. 
  
      Check ALL the lighting on output,  OFFOutput No Power.
      When current fuse is blown check wiring for shorts or damage. 
ON Output Power "On".
      Incorrect hookup or defecive lighting will blow the fuse.   AUTOPhoto cell Control "On".
 4H, 6H, 8HPhoto cell Control "On"
IMPORTANT  SAFETY  INSTRUCTIONS When Timer ends, output
  oower will  Turn OFF.
   When applying electrical products, basic cautions should  Fig 3 (Time rotary control switch) 
 
   
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS
2. Read and follow all instructions that are on the product or provided with the product.
3. For a cord-connected or direct plug-in power unit, do not use an extension cord.
4. Reference the National Electrical Code, ANSO/NFPA70,specifically for the installation of
    wiring and clearances from 
    power and lighting conductors.
5. Installation work and electrical wiring must be done by qualified person(s) in accordance
    with all applicable codes 
    and standards, including fire-rated construction in your state or country.
6. For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a pool.

7. For a cord-connected or direct plug-in unit , do not use in a bathroom.
8. For a direct plug-in or cord-connected power unit marked in accordance
    with "WARNING: Risk of Electric Shock.
    Install only to a covered Class A GFCI receptacle that has an enclosure
    that is weatherproof with the attachment plug cap inserted or removed."
9. "WARNING: Risk of Electric Shock. Mount the unit at a height greater 
    than 1 foot from the ground  surface."
10. "WARNING: Only For Wall Mounting"
11. Suitable for both Indoor and Outdoor use. If for indoor use, transformer
      can be installed on a flat secure surface area or hung on a wall.

Wiil Power LED outdoor Lighing up to 4.8 amp with Max load of 5A